Datamax-oneil DPL Programmer’s Manual Manual do Utilizador descarregar pdf (Página 33)

System-Level Command Functions

STX S Set Feed Speed

This command controls the output rate of the media when the FEED Key is pressed.

Syntax:

STX>Sn

Where:

n -

Is a letter value (see Appendix L).

STX T Print Quality Label

This command instructs the printer to produce a Print Quality label, a format comprised

of different patterns and bar codes useful in printer setup. To capture all printed

information, use the labels as wide as the maximum print width (see Appendix K) and at

least four inches (102 mm) long.

Syntax:

STX>T

Printer response

(dot patterns may

vary):

STX t Test DRAM Memory Module

This command tests the DRAM module. The printer returns a one-line message stating

the module condition (no message is returned if a module is unavailable). The printer

must have Feedback Characters enabled for this command to function. Feedback

Characters can be enabled via the menu (see the Operator’s Manual for additional

information).

Syntax:

STX>t

Response format:

Module D: xxxxK RAM Tested results <CR>

Where:

xxxx

Module size in Kbytes.

results

Test results given as “Good” or “Bad”.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 295 296

Sem comentários

Datamax-oneil DPL Programmer’s Manual Manual do Utilizador Página 33