Datamax-oneil Performance series User Guide Manual do Utilizador descarregar pdf (Página 115)

135 Performance Series User’s Guide

5 Cleaning and Maintenance

Overview

To maintain good print quality and increase printhead life, proper cleaning should be

routinely performed using factory-approved cleaning supplies.

Caution: A contaminated printhead can cause premature printhead failure.

Caution: Failure to clean the printhead as detailed in this manual could void the

printhead manufacturer’s warranty.

Intervals

For direct thermal printing, the printhead should be cleaned whenever a roll of labels is

replaced or every 6,500 inches printed. For users printing via thermal transfer, the

printhead should be cleaned every time a roll of ribbon is replaced. For higher coverage

printing, printhead cleaning may need to be performed more frequently.

Supplies

Caution: Cleaning should only be performed using factory-approved and authorized

cleaning supplies. Any use of non-authorized cleaning supplies can void the

printhead and platen roller warranties.

• Cleaning Pens

• Cleaning Cards/Film

• Can of Compressed Air

• Clean, lint-free cloth

• Isopropyl Alcohol

Cleaning the Automatic Loading Sensor

The automatic loading sensor should be cleaned whenever necessary.

1. Remove the labels.

2. With a can of compressed air, spray the sensor to remove dust and debris.

3. Repeat as necessary.

Cleaning the Top-of-Form Sensor

The Top of Form sensor should be cleaned whenever necessary.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 142 143

Sem comentários

Datamax-oneil Performance series User Guide Manual do Utilizador Página 115