Datamax-oneil M-Class Mark II Operator’s Manual Manual do Utilizador Página 44
- Página / 100
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Chapter 4 – Menu System 38
UNITS OF MEASURE Sets the measurement standard used, where:
IMPERIAL Uses inches. (Default Setting)
METRIC Uses millimeters and centimeters.
INPUT MODE Defines the type of processing that will occur when data is received, where:
DPL Datamax-O’Neil programming language processing will be used. (Default Setting)
LINE Line Mode processing will be used, where data terminated by a carriage return will
be extracted and inserted for template printing.
PL-Z Alternative programming language processing will be used, with the exception of
the following DPL specific-parameters:
DPL Emulation;
SOP Emulation; and,
Label Store.
AUTO Identifies then activates the appropriate emulation parser for the data.
Correct identification can be dependant upon HOST SETTINGS / HOST TIMEOUT (see Section
4.2.5). Also, extraneous characters may, in some cases, render the data unrecognizable, thus
requiring manual selection of the desired mode.
USER LABEL MODE
Sets the printer to power-up as default, where:
ENABLED
Functions in standalone mode for quick access to user defined formats; see Section
3.6.
This mode will remain active until disabled.
DISABLED
Functions in normal mode, awaiting commands from a host.
DPL EMULATION Allows the printer to reproduce, for backward compatibility, label formats with the
same characteristics as those produced by legacy models, where:
STANDARD Standard DPL processing will be used for printing. (Default Setting)
ALLEGRO Processes DPL data as an Allegro®, including row position calculations based on
194 dots per inch and the exceptions noted below.
PRODIGY PLUS Processes DPL data as a Prodigy Plus®, including column calculations based on
200 dots per inch and the exceptions noted below.
PRODIGY Processes DPL data as a Prodigy®, including column calculations based on 200
dots per inch and the exceptions noted below.
Exceptions: Data Terminator processing – When printing I 2 of 5 bar codes D, J,
and L, the first non-numeric character processed will terminate the
bar code data field.
Bar Size exception – When printing I 2 of 5 bar code L, if the bar
size specified is greater than P (25) it is automatically decreased to
10.
Human Readable Fonts fixed size – When printing EAN and UPC bar
codes B, C, F, G, M, and N, a fixed font size is produced.
Line and box vertical sizing anomaly – When printing rotations 2 and
4, lines and boxes are affected by the vertical multiplication factor
defined in the DPL Dxx command.
Column position defaults – Column positions greater than the
printhead width are adjusted back to the printable area then printed.
Bar codes in rotation 3 - (upside down / right to left) default sizing –
When row position in rotation 3 is less than bar code height, bar
codes falling off the label's leading edge are pushed back onto the
label.
<STX>L command – When no printable fields reside in the format, it
results in no label movement.
- Operator’s Manual 1
- Copyright Information 3
- Limitation of Liability 3
- 1 Getting Started 5
- 2 Printer Setup 5
- 3 Printer Operation 5
- 4 Menu System 5
- Additional Requirements 7
- Chapter 2 - Printer Setup 3 9
- Power Connection 9
- Chapter 2 - Printer Setup 4 10
- Interface Connection 10
- Chapter 2 - Printer Setup 5 11
- Chapter 2 - Printer Setup 6 12
- Chapter 2 - Printer Setup 7 13
- ‘Sensor Eye’ Mark 14
- Slide Tab 14
- Ink Side (CSO Ribbon) 15
- Ink Side (CSI Ribbon) 15
- Printhead Latch 15
- Ribbon Take-up Hub 18
- 3.1.1 Lights 19
- 3.1.2 Buttons 20
- Icons & Indicators 21
- Important Notes: 23
- 3.5.1 Quick Calibration 25
- 3.5.2 Empty Calibration 25
- 3.5.3 Standard Calibration 26
- Chapter 4 – Menu System 23 29
- Chapter 4 – Menu System 24 30
- Chapter 4 – Menu System 25 31
- Media Settings 31
- Chapter 4 – Menu System 26 32
- Chapter 4 – Menu System 27 33
- Chapter 4 – Menu System 28 34
- Print Control 34
- Chapter 4 – Menu System 29 35
- Chapter 4 – Menu System 30 36
- Printer Options 36
- (1 - 255 x 10 mS) 37
- (1.10 - 4.00 IN.) 37
- Chapter 4 – Menu System 32 38
- Chapter 4 – Menu System 33 39
- Chapter 4 – Menu System 34 40
- System Settings 40
- Chapter 4 – Menu System 35 41
- Chapter 4 – Menu System 36 42
- Chapter 4 – Menu System 37 43
- Chapter 4 – Menu System 38 44
- Chapter 4 – Menu System 39 45
- Chapter 4 – Menu System 40 46
- Chapter 4 – Menu System 41 47
- Communications 47
- Chapter 4 – Menu System 42 48
- ALTERNATE 49
- CODES 2 49
- Chapter 4 – Menu System 44 50
- Chapter 4 – Menu System 45 51
- Diagnostics 51
- Chapter 4 – Menu System 46 52
- MCL Options 52
- Printhead Assembly 54
- Cotton Swab 54
- Thumbscrew 55
- Printhead Mounting Screw 58
- Darkness Adjustment 59
- Fault Messages: 69
- 72
- Warning Messages: 73
- Mechanical 75
- Printing 75
- GPIO Port Configuration 79
- Printer Setup Mode 81
- Menu Item 82
- Menu Items and Values 83
- Label 1 Label 2 87
- Label Alignment = YES 88
- Label Alignment = AUTO 89
- Label Alignment = NO 89
- Calibration Mode 92
Manuais e produtos relacionados com Impressoras Datamax-oneil M-Class Mark II Operator’s Manual
Impressoras Datamax-oneil PrintPAD Hinge and_or Latch Replacement Kit Manual do Utilizador
(2 páginas)
(2 páginas)
Impressoras Datamax-oneil microFlash 4t_4te Truck Mount Swivel Velcro Pad Manual do Utilizador
(1 páginas)
(1 páginas)
Electrolux ER8548B manuály
Uživatelské manuály a uživatelské příručky pro ne Electrolux ER8548B.
Poskytujeme 1 manuály pdf Electrolux ER8548B ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentários a estes Manuais