Datamax-oneil Class Series Programmer’s Manual Manual do Utilizador descarregar pdf (Página 108)

Extended System-Level Command Functions

Class Series Programmer’s Manual 94

STX KJ Assign Communication Port (MCL Command)

This command assigns a communication port for specific use. When activating MCL, all ports are

assigned to MCL; this command allows changes to that assignment.

Syntax:

Where:

- Port ID: P = Parallel

S = Serial (A)

U = USB

N = Ethernet

L = Wireless

A = Serial (B)

- Flag: 1 = DPL

0 = MCL

Sample:

<STX>KJN1

The sample forces the Ethernet port to bypass MCL and go directly to DPL.

STX KI GPIO Input

This command configures the GPIO input channels of the Applicator Interface Card; see Appendix J

for details.

Syntax:

<STX>KIffnspwww<CR>

Where:

2 character function name abbreviation (e.g., PS [Print Start],

I1 [User Input 1], etc).

- Pin number, where 1 – 8 is the valid range.

- Signal type, where: L = Level; P = Positive Pulse; and N =

Negative Pulse

- Polarity, where: 0 = Active Low; and 1 = Active High

www

- 3 character filter pulse width, in milliseconds.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 299 300

Sem comentários

Datamax-oneil Class Series Programmer’s Manual Manual do Utilizador Página 108