Datamax O'Neil H-8308P Manual do Operador descarregar pdf (Página 58)

Set Defaults

The factory default settings for the printer setup can be reset. To reset to the default settings, select

Set Defaults. Confirm your selection by selecting the green Accept button.

Note: If the current custom settings have not been saved but will be needed again, be sure to save

them with the User Setups from the Tools menu before resetting to

defaults.

4.3.14 Media Settings

Select Media to change the print media settings.

Media Settings

Value

Ranges

Default

Paper Sensor Type

Gap

Mark on Bottom

Notch

Continuous

Gap

Ribbon Mode

Coated In

Coated Out

None

Coated In

Heat

1 to 30

Heat Balance

1 to 10

Rewinder Tension

1 to 20

12*

Ribbon Low Diameter

1.0 to 2.0 in.

1.5 in.

Gap/Mark Offset

-2.23 to 6 in.

Gap/Mark Noise

0 to 600 dots

Ribbon Length

0 to 1,000 in.

Form Length

0 to 99 in.

4 in.

Number of Forms

0 to 10,000

Note: *These values may vary depending on the printer model.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 115 116

Comentários a estes Manuais

Sem comentários

Datamax O'Neil H-8308P Manual do Operador Página 58

Comentários a estes Manuais

Manuais e produtos relacionados com Impressoras de rótulos Datamax O'Neil H-8308P