Datamax O'Neil H-4310X Manual do Operador Página 134
- Página / 180
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
124 H-Class
Media (continued)
H-4212X, H-4310X, & H-4606X Media Dimensional Requirements
[1]
Minimum
Maximum
Designator Description
inches mm inches mm
A Label width 1.00 25 4.65 118
B Liner width 1.00 25 4.65 118
C Gap (or notch) between labels
[3]
.08 2 – –
D Label length
[3]
.25 6 – –
E Media thickness .0025 .06 .01 .25
F Notch opening width .08 2 – –
G Media edge to sensor aperture .20 5 2.25 70
H Reflective mark width
[2]
.47 12 4.65 118
I Distance between reflective marks
[3]
.25 6 – –
J Reflective mark length
[3]
.08 2 – –
K Label repeat distance
[3]
.33 8 – –
[1]
Units of measure are referenced by the direction of label feed.
[2]
The reflective (black) mark must be carbon based, placed on the backside of the stock, and the
reflectance shall be less than 10% at wavelengths of 950 and 640 nm.
[3]
The maximum allowable length of the combined label and gap (or mark) measurement cannot
exceed 99.99 inches.
H-6210 & H-6308 Models
Mechanical
Height: 13 inches (329.7 mm)
Width: 15 inches (381 mm)
Depth: 18.9 inches (480.1 mm)
Weight: 47 pounds (21.3 kg)
Electrical
Display: Graphics (128 X 64 pixels) with backlight; or
(Optional) Graphics (240 X 320 pixels) with backlight.
- Operator’s Manual 1
- Copyright Information 3
- Limitation of Liability 3
- H-4212 and H-6308 models: 4
- Waves Act 4
- Special Instructions 5
- Applicability 5
- Contents 7
- Overview 11
- Standard 12
- (available except as noted) 13
- 6 H-Class 16
- Getting Started 17
- 2.2 Installation 18
- Setting up the Printer 23
- 3.1.3 Rewinding Media 29
- 34
- 3.2 Media Sensor Adjustment 35
- 3.3 Ribbon Loading 36
- 30 H-Class 40
- Using the Control Panel 41
- 4.1.1 The Display 42
- 4.1.2 Keypad Functions 43
- 4.2 The System Menu 44
- 4.2.1 Media Settings 45
- Section 7 for label details 48
- 4.2.3 Printer Options 50
- 4.2.4 System Settings 61
- STANDARD 68
- 4.2.5 Communications 71
- ENABLED 74
- NETWORK REPORT 76
- 4.2.6 Diagnostics 79
- 4.2.7 MCL Options 82
- 4.3 The Test Menu 83
- 4.3.2 Ribbon Test Label 84
- 4.3.3 Test Label 84
- 4.3.4 Validation Label 84
- 4.3.5 Print Configuration 85
- 4.3.6 Print Last Label 85
- 4.3.7 User-Defined Label 85
- 76 H-Class 86
- Operating, Adjusting and 87
- Maintaining the Printer 87
- If changes require a 89
- 5.2.1 Standard Calibration 90
- Do not position the 93
- Sample Calibration Table 94
- • Die-cut – Remove a label 95
- • Notched – Position the 95
- The re-sampled 97
- 5.3 Reset Methods 99
- 5.3.2 Level One Reset 100
- 5.3.3 Level Two Reset 100
- 5.5 Maintenance 102
- 5.6 Updating the Firmware 110
- 5.8 Fonts 112
- Troubleshooting 117
- To continue printing, enter 125
- 6.2 Hex Dump Mode 127
- Specifications 129
- H-6212X & H-6310X Models 136
- Media (continued) 140
- 132 H-Class 142
- Appendix A 143
- File Handling Messages 144
- 136 H-Class 146
- Appendix B 147
- Speed Ranges 148
- 140 H-Class 150
- Appendix C 151
- Serial Port 152
- Pin Number 152
- RS-422 & RS-485 152
- Function 152
- Appendix D 153
- Appendix E 157
- 148 H-Class 158
- Appendix F 159
- Assigned IP Address 160
- Using the HTML Pages 161
- 152 H-Class 162
- Appendix G 163
- Glossary 177
Manuais e produtos relacionados com Impressoras de rótulos Datamax O'Neil H-4310X
(100 páginas)Electrolux ER8548B manuály
Uživatelské manuály a uživatelské příručky pro ne Electrolux ER8548B.
Poskytujeme 1 manuály pdf Electrolux ER8548B ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentários a estes Manuais