Datamax O'Neil Compact 4 Manual descarregar pdf (Página 11)

A26618-A

ENG

Adjusting the print head pressure

Adjusting the pressure of the

print head is necessary when

using different types of media,

e.g. labels, paper or tickets.

- Open the front cover.

- Turn the release lever to lift the

printhead.

Use a small flathead screwdriver and

turn the adjusting screws counter-

clockwise in order to increase the

pressure (about 0,5 - 1 turns).

For information on the printer’s

status:

Conduct a test print

- Load the media.

Use an approximately 110 mm

wide print width.

- Hold in the start button.

- Turn on the power switch.

A test print will occur

• Ensure that the printed pattern

is even across the entire width of

the print surface. Any secondary

adjustment should be made accord-

ing to instructions in the “Print

head adjustment” section.

- Exit test mode by shutting off the

power switch.

Print head adjustment

ENGLISH - 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comentários a estes Manuais

Sem comentários